“So what is the correct way to iron ao dai? Find out the secret to keeping your ao dai always soft and beautiful right now!”
Introduction to how to properly iron ao dai
Ao Dai is a traditional Vietnamese costume, so ironing it properly is very important to keep the beauty of the ao dai when worn. Below are instructions for properly ironing ao dai, which you can refer to.
1. Iron the collar of the ao dai
– Place the collar flat on a flat surface and use an iron to iron slowly until the collar is flat and wrinkle-free.
– Turn the collar over and iron the back side as above.
2. Iron the shoulders and sleeves
– To iron the shoulders and sleeves squarely, the iron should be placed inside the shoulder or use a pillow or fabric item with the same tension as the pillow.
– Gently push the iron downward from the arm to the cuff so that it is as straight as possible.
3. Iron the badge onto the ao dai
– Place the ao dai on a flat surface and determine the location where the badge will be attached.
– Set the iron temperature and iron the badge for 2-3 minutes so it sticks to the shirt.
The above experiences and instructions will help you iron your ao dai properly and simply.
Why is it important to know how to iron ao dai properly?
To maintain the beauty of the ao dai, ironing it properly and perfectly is very important. If you don’t know how to iron your ao dai properly, it can damage the ao dai and lose the traditional beauty of Vietnamese clothing.
Properly ironing ao dai can help:
- Keep the ao dai always smooth and beautiful when worn.
- Protect decorative details, embroidered flowers and studded stones on the ao dai.
- Avoid damaging silk, brocade, or silk fabrics due to improper ironing.
- Keeps the ao dai stiff and easy during ironing.
Knowing how to iron ao dai properly also helps you:
- Save time and effort in the process of ironing ao dai.
- Make sure the ao dai is always in the best condition when in use.
- Avoid mistakes when ironing ao dai that can damage the outfit.
Basic steps to iron ao dai
Step 1: Iron the collar
Place the ao dai collar flat on a flat surface and use an iron to iron it slowly until the collar is flat and wrinkle-free. Turn the collar over and iron the back as above.
Step 2: Iron the shoulders and sleeves
To iron the shoulders and sleeves squarely without wrinkles, you should place the iron inside the shoulders and sleeves to iron them flat. If the ironing board is too large, you can use a pillow or fabric item with the same tension as a pillow to maintain the standard shape of the shoulders when ironing.
Step 3: Iron the shoulders, armpits and long sleeves
Place the sleeve on a flat surface, then gently push the iron down from the arm to the cuff as straight as possible. For the remaining sleeve, just follow the same procedure as above.
Below are the steps to iron badges on ao dai for students:
– Step 1: Place the ao dai on a flat surface, and determine the location where the badge will be attached.
– Step 2: Place the badge in the correct position, then keep it from moving. Next, set the iron temperature to about 180 degrees Celsius and iron the badge for 2-3 minutes so it sticks to the shirt.
– Step 3: Turn the shirt over and iron it back and forth 3 more times to ensure better adhesion.
Remember that you should not iron your ao dai when the fabric is damp, especially with silk fabric. Always adjust the iron temperature to suit each fabric type to avoid damage.
How to choose the right fabric to iron ao dai
To iron ao dai properly, choosing the right fabric is also very important. Here are some things to note when choosing fabric to iron ao dai:
1. Fabric material
– Choose silk or brocade fabric: Silk and brocade fabrics are often popular choices for traditional ao dai. They are shiny and soft, creating a noble beauty for the ao dai. When ironing ao dai made from silk or brocade, you need to adjust the iron temperature to avoid damaging the fabric.
– Linen material: Linen is also a popular choice for ao dai. Linen has good breathability and is usually easy to iron. When ironing ao dai from linen, you need to adjust the iron temperature appropriately to avoid burning the fabric.
2. Fabric type
– Thin fabric: If you want the ao dai to be tight and light, choose a thin fabric like velvet or silk. Ironing ao dai from thin fabric requires care to avoid damaging the fabric.
– Thick fabric: If you want the ao dai to have a straight and luxurious silhouette, choose a thick fabric like brocade. When ironing ao dai from thick fabric, you need to use higher temperatures and stronger ironing pressure to achieve the best results.
The above notes will help you choose the right fabric to effectively iron ao dai and ensure the beauty of the traditional outfit.
The secret to keeping ao dai soft and beautiful when ironed
To keep your ao dai soft and beautiful when ironed, you need to keep in mind the following tips:
Use a steam iron
– A steam iron will help your ao dai become softer after the ironing process.
– The steam from the iron will soften the fabric and effectively remove wrinkles.
Iron the ao dai from the inside
– To ensure the safety of decorative motifs, iron the ao dai from the inside or use another cloth to cover it before ironing directly.
– This will help protect decorative details and at the same time ensure the ao dai is ironed evenly and softly.
Choose the right temperature
– For silk fabric, adjust the iron temperature to the lowest level and iron evenly to avoid burning the fabric.
– If your ao dai is made from silk fabric, iron it at low temperature and be careful not to damage the fabric.
The above tips will help your ao dai stay soft and beautiful when ironed, while also protecting the decorative details on the shirt.
Common mistakes when ironing ao dai and how to avoid them
1. Using too high a temperature
When using too high a temperature to iron an ao dai, it can damage the fabric, burn or deform the ao dai. To avoid this, always adjust the iron temperature to suit the fabric, and start with a low temperature before gradually increasing it.
2. Not paying attention to decorative details
When ironing ao dai, if you do not pay attention to embroidered or hidden embroideries, it can damage or peel off precious decorative details. To avoid this, use another cloth to cover it before ironing directly, and move the iron into the gaps around the patterns.
3. Iron the ao dai when the fabric is damp
Ironing the ao dai while the fabric is still damp can cause more wrinkles to disappear due to the stretch and stretch of the fabric when ironed. For silk fabric, ironing when the fabric is dry can cause more damage. To avoid this, wait for the fabric to dry completely before ironing.
How to iron ao dai for beginners
If you are just starting to learn how to iron ao dai, please refer to the following steps to ensure your ao dai is ironed properly and safely.
Prepare
– Prepare the iron and set the temperature appropriate to the fabric of the ao dai.
– Place the ao dai on a flat surface before starting to iron.
Iron the collar
– Start ironing from the collar first, making sure that the iron temperature is enough to flatten this area.
– Turn the collar over and iron the back similarly.
Iron your sleeves
– Place the sleeve on a flat surface and iron from the wrist down to the shoulder.
– Do the same with the remaining sleeve.
Remember, ironing ao dai requires care and patience, especially when you first start learning. Always pay attention to the temperature and fabric type to ensure your ao dai is ironed safely and beautifully.
Basic knowledge of how to iron ao dai
Ao Dai is a traditional Vietnamese costume, so ironing it properly is very important to keep the beauty of the ao dai when worn.
How to iron ao dai collar
– Place the collar flat on a flat surface and use an iron to iron slowly until the collar is flat and wrinkle-free.
– Turn the collar over and iron the back side as above.
How to iron the shoulders and sleeves
– Place the iron inside the shoulders and sleeves to iron them flat.
– If the ironing board is too large, use a pillow or fabric item with the same tension as the pillow to maintain the standard shape of the shoulders when ironing.
How to iron the shoulders, armpits and long sleeves
– Place the sleeve on a flat surface and gently push the iron down from the arm to the cuff as straight as possible.
– Use another cloth to cover it before ironing directly to ensure safety for decorative details.
How to iron badges on ao dai
– Place the badge in the correct position, then keep it from moving.
– Set the iron temperature to about 180 degrees Celsius and iron the badge for 2-3 minutes so it sticks to the shirt.
– Turn the shirt over and iron it back and forth 3 more times to ensure better adhesion.
How to iron ao dai effectively
To iron ao dai effectively, you need to pay attention to the following steps:
Prepare an iron and ao dai
– Make sure your iron is working properly and has been adjusted to the appropriate temperature for the fabric of the ao dai.
– Determine the position that needs to be ironed on the ao dai and prepare the shirt before starting the ironing process.
Apply proper ironing techniques
– Start ironing from the collar, then move on to the shoulders and sleeves, making sure you are using the proper ironing technique to avoid damaging the decorative details on the ao dai.
– Place the ao dai on a flat surface and use an iron to iron slowly, evenly and carefully.
Ensure safety for ao dai
– Avoid ironing ao dai when the fabric is damp, especially with silk fabric, to avoid damaging the fabric.
– Use accessories such as plastic bags or fabric items to protect decorative details when ironing the ao dai.
If you follow the above steps carefully, you will be able to iron your ao dai effectively and ensure that its beauty is maintained.
Important notes when ironing ao dai
1. For silk fabric and silk fabric:
- Do not iron when the fabric is damp, this may damage the fabric.
- Use a dry iron or moisten with a water spray bottle when ironing with a steam iron.
- Place the shirt in a plastic bag and put it in the freezer for about 1 hour before ironing so that the fabric becomes stiffer.
2. For decorative details:
- You should only iron on the inside or use another cloth to cover it before ironing directly to protect decorative details.
- Move the iron into the spaces around the patterns to avoid damaging them.
3. For iron temperature:
- Adjust the temperature to suit each fabric type to avoid damage.
- Start ironing at a low temperature first, then slowly increase it.
Above are the proper ways to iron ao dai that you can apply to keep the outfit always new and beautiful. Don’t forget to follow the basic steps and pay attention to the material of the ao dai to avoid damage or deformation of the outfit. Wish you success!
